What to do when things go wrong
First, have a look at the common problems listed below. If you can figure it out from these notes, it will be quicker than asking for help.
Check that you have the latest version of any packages that look relevant. Unfortunately it’s not always easy to figure out what packages are relevant, but if there was a bug that’s already been fixed, it’s easy to upgrade and get on with what you wanted to do.
Jupyter fails to start
Have you installed it? ;-)
If you’re using a menu shortcut or Anaconda launcher to start it, try opening a terminal or command prompt and running the command
If it can’t find
jupyter, you may need to configure your
PATHenvironment variable. If you don’t know what that means, and don’t want to find out, just (re)install Anaconda with the default settings, and it should set up PATH correctly.
If Jupyter gives an error that it can’t find
notebook, check with pip or conda that the
notebookpackage is installed.
jupyter-notebook(with a hyphen). This should normally be the same as
jupyter notebook(with a space), but if there’s any difference, the version with the hyphen is the ‘real’ launcher, and the other one wraps that.
Jupyter doesn’t load or doesn’t work in the browser
Try in another browser (e.g. if you normally use Firefox, try with Chrome). This helps pin down where the problem is.
Try disabling any browser extensions and/or any Jupyter extensions you have installed.
Some internet security software can interfere with Jupyter. If you have security software, try turning it off temporarily, and look in the settings for a more long-term solution.
In the address bar, try changing between
127.0.0.1. They should be the same, but in some cases it makes a difference.
Jupyter can’t start a kernel
Files called kernel specs tell Jupyter how to start different kinds of kernels.
To see where these are on your system, run
jupyter kernelspec list:
$ jupyter kernelspec list Available kernels: python3 /home/takluyver/.local/lib/python3.6/site-packages/ipykernel/resources bash /home/takluyver/.local/share/jupyter/kernels/bash ir /home/takluyver/.local/share/jupyter/kernels/ir
There’s a special fallback for the Python kernel:
if it doesn’t find a real kernelspec, but it can import the
it provides a kernel which will run in the same Python environment as the notebook server.
A path ending in
ipykernel/resources, like in the example above,
is this default kernel.
The default often does what you want,
so if the
python3 kernelspec points somewhere else
and you can’t start a Python kernel,
try deleting or renaming that kernelspec folder to expose the default.
If your problem is with another kernel, not the Python one we maintain, you may need to look for support about that kernel.
Multiple python environments, whether based on Anaconda or Python Virtual environments, are often the source of reported issues. In many cases, these issues stem from the Notebook server running in one environment, while the kernel and/or its resources, derive from another environment. Indicators of this scenario include:
importstatements within code cells producing
General kernel startup failures exhibited by nothing happening when attempting to execute a cell.
In these situations, take a close look at your environment structure and ensure all packages required by your notebook’s code are installed in the correct environment. If you need to run the kernel from different environments than your Notebook server, check out IPython’s documentation for using kernels from different environments as this is the recommended approach. Anaconda’s nb_conda_kernels package might also be an option for you in these scenarios.
Another thing to check is the
kernel.json file that will be located in the
aforementioned kernel specs directory identified by running
jupyter kernelspec list.
This file will contain an
argv stanza that includes the actual command to run
when launching the kernel. Oftentimes, when reinstalling python environments, a previous
kernel.json will reference an python executable from an old or non-existent location.
As a result, it’s always a good idea when encountering kernel startup issues to validate
argv stanza to ensure all file references exist and are appropriate.
Although Jupyter Notebook is primarily developed on the various flavors of the Unix operating system it also supports Microsoft Windows - which introduces its own set of commonly encountered issues, particularly in the areas of security, process management and lower-level libraries.
The primary package for interacting with Windows’ primitives is
Issues surrounding the creation of the kernel’s communication file utilize
secure_write()function. This function ensures a file is created in which only the owner of the file has access. If libraries like
pywin32are not properly installed, issues can arise when it’s necessary to use the native Windows libraries.
Here’s a portion of such a traceback:
File "c:\users\jovyan\python\myenv.venv\lib\site-packages\jupyter_core\paths.py", line 424, in secure_write win32_restrict_file_to_user(fname) File "c:\users\jovyan\python\myenv.venv\lib\site-packages\jupyter_core\paths.py", line 359, in win32_restrict_file_to_user import win32api ImportError: DLL load failed: The specified module could not be found.
As noted earlier, the installation of
pywin32can be problematic on Windows configurations. When such an issue occurs, you may need to revisit how the environment was setup. Pay careful attention to whether you’re running the 32 or 64 bit versions of Windows and be sure to install appropriate packages for that environment.
Here’s a portion of such a traceback:
File "C:\Users\jovyan\AppData\Roaming\Python\Python37\site-packages\jupyter_core\paths.py", line 435, in secure_write win32_restrict_file_to_user(fname) File "C:\Users\jovyan\AppData\Roaming\Python\Python37\site-packages\jupyter_core\paths.py", line 361, in win32_restrict_file_to_user import win32api ImportError: DLL load failed: %1 is not a valid Win32 application
Resolving pywin32 Issues
In this case, your
pywin32module may not be installed correctly and the following should be attempted:pip install --upgrade pywin32
or:conda install --force-reinstall pywin32
followed by:python.exe Scripts/pywin32_postinstall.py -install
Scriptsis located in the active Python’s installation location.
Another common failure specific to Windows environments is the location of various python commands. On
*nixsystems, these typically reside in the
bindirectory of the active Python environment. However, on Windows, these tend to reside in the
Scriptsfolder - which is a sibling to
bin. As a result, when encountering kernel startup issues, again, check the
argvstanza and verify it’s pointing to a valid file. You may find that it’s pointing in
Scriptsis correct, or the referenced file does not include its
.exeextension - typically resulting in
This Worked An Hour Ago
The Jupyter stack is very complex and rightfully so, there’s a lot going on. On occassion
you might find the system working perfectly well, then, suddenly, you can’t get past a
certain cell due to
import failures. In these situations, it’s best to ask yourself
if any new python files were added to your notebook development area.
These issues are usually evident by carefully analyzing the traceback produced in
the notebook error or the Notebook server’s command window. In these cases, you’ll typically
find the Python kernel code (from
ipykernel) performing its imports
and notice a file from your Notebook development error included in that traceback followed
File "C:\Users\jovyan\anaconda3\lib\site-packages\ipykernel\connect.py", line 13, in from IPython.core.profiledir import ProfileDir File "C:\Users\jovyan\anaconda3\lib\site-packages\IPython_init.py", line 55, in from .core.application import Application ... File "C:\Users\jovyan\anaconda3\lib\site-packages\ipython_genutils\path.py", line 13, in import random File "C:\Users\jovyan\Desktop\Notebooks\random.py", line 4, in rand_set = random.sample(english_words_lower_set, 12) AttributeError: module 'random' has no attribute 'sample'
What has happened is that you have named a file that conflicts with an installed package that is used by the kernel software and now introduces a conflict preventing the kernel’s startup.
Resolution: You’ll need to rename your file. A best practice would be to prefix or namespace your files so as not to conflict with any python package.
Asking for help
As with any problem, try searching to see if someone has already found an answer. If you can’t find an existing answer, you can ask questions at:
Peruse the jupyter/help repository on Github (read-only)
Or in an issue on another repository, if it’s clear which component is responsible. Typical repositories include:
secure_write()and file path issues
jupyter_client - kernel management issues found in Notebook server’s command window.
IPython and ipykernel - kernel runtime issues typically found in Notebook server’s command window and/or Notebook cell execution.
Should you find that your problem warrants that an issue be opened in notebook please don’t forget to provide details like the following:
What error messages do you see (within your notebook and, more importantly, in the Notebook server’s command window)?
What platform are you on?
How did you install Jupyter?
What have you tried already?
jupyter troubleshoot command collects a lot of information
about your installation, which can also be useful.
When providing textual information, it’s most helpful if you can scrape the contents into the issue rather than providing a screenshot. This enables others to select pieces of that content so they can search more efficiently and try to help.
Remember that it’s not anyone’s job to help you. We want Jupyter to work for you, but we can’t always help everyone individually.